Rural Residential
A Viking Building can be ideally suited for the larger property that is primarily residential but requires storage for equipment, vehicles, horses, etc. Basically, a residential barn/garage concept.
We Will Satisfy You With Our Expertise
Flamborough
This building is a 32 ft. x 54 ft. (1728 sq. ft.) with a 12 ft. high wall. The bay doors are 12 ft. wide and 10 ft. high steel sectional roll ups. Larger windows allow for more functionality, while the Board and Baton provide a country look. The floor is concrete and the roof is cost efficient coloured steel.
Location: Flamborough.
Primary Use: Equipment and vehicle storage.
Caledon
32×48, 12ft. wall height with 2 oversized bay doors, colored steel cladding on the roof, walls, and trims with 5” thick concrete floor.
Location: Caledon
Caledonia/Cayuga
This mid-size building provides the perfect size 32 ft. x 48 ft. (1536 sq. ft.) for country residential living. A 10 ft. wall height, two entrance doors, and one bay door offer efficient use of space. Steel cladding provides no exterior maintenance and offers a 25 year guarantee.
Location: Caledonia/Cayuga.
Primary Use: Older car, equipment, and new vehicle storage.
Cambridge
This 32′ x 40′ (1,280 sq. ft.) is the car collector’s dream garage. 12′ wall height with a combination scissor truss and attic design. This allows for additional interior height and storage space. Two large bay doors, entrance door and windows. R-30 pink insulation in the ceiling with R-20 in the walls. The entire interior is clad with interior steel liner. A 6” re-enforced concrete floor completes the package.
Locations: Cambridge
Primary use: Classic car workshop/storage/show room
Newmarket
This 30′ x 40′ (1200 sq. ft.) accessory building was built to compliment the newly constructed home. With 10′ hight walls, and maintenance free cladding, it prides addition space for vehicles, tractors snowmobiles etc. two steel sectional residential door and 5 windows completing the package. The concrete floor is 5” thick and re-enforced.
Location: Newmarket
Primary used: Additional storage and workshop to maintain, 5 acre property.
Bolton
This 28′ x 40′ (1,120 sq. ft.) hobby shop compliments and matches the existing home. The wall height is 10′ with a 6/12 pitch roof and scissor truss to allow for more interior height. The bay doors, windows, and entrance door match the home. Maintenance free coloured steel cladding completes the exterior. With a 5” thick concrete floor, and insulated walls and ceiling this is a perfect hobby shop for the car collector.
Locations: Bolton
Primary use: Hobby shop, classic, sports cars
Flamborough
This 24 x 40′ (960 sq. ft.) garage has a 10′ wall (interior) height, 3 walls are clad in coloured steel, while the front face is board and baton. The roof and trims are coloured steel. 2 bay doors 18′ x 8′, 9′ x 8′, steel sectional insulated, residential. 2 entrance doors and 1 large window, 2 octagon windows. The concrete floor is 5” thick and re-enforced.
Location: Flamborough
Primary use: Detached residential garage.
Caledon
This 24′ x 40′ (960 sq. ft.) garage was built to match the existing attached garage. 10′ wall height with Gambel style roof design, 3 – 9′ x 8′ steel sectional insulated bay doors, 2 – windows, maintenance free coloured steel cladding, and trims, 5” thick concrete floor. This building provides enough storage for 6 classic cars.
Location: Caledon
Primary use: Classic car storage
Dunnville Area
This 24′ x 32′ (786 sq. ft.) hobby-shop/garage has 10′ high walls, 14′ to the peak. The two steel sectional bay doors are 9′ Wx 8′ H. The building is completely maintenance free with coloured galvanized steel cladding on the roof,walls and all trims. The concrete floor is 5” think re-enforced and troweled to a smooth finish.
Locations: Dunnville Area
Primary use: Garden equipment, workshop, vehicles
Brantford
24 x 40′ (960 sq. ft.)
This garage features two 9′ x 8′ bay doors, entrance door and windows to match the existing house.
Location: Brantford
Sheffield
26′ x 42′ (1092 sq. ft.)
The 3 bay doors allow for easy access to the entire building and multiple windows provide plenty of natural light. A scissor truss design, with high lift door tracks, provide lots of interior height.
We worked with the home owners to ensure the design and finished product met all their requirements and needs.
Location: Sheffield
Caledon
24′ x 40′ (960 sq. ft.)
This garage features coloured steel roof with board & baton exterior. Three 9′ x 8′ steel sectional residential doors, entrance door and 2 windows finish the exterior. 10′ high interior space with radiant floor heating and a 5″ thick concrete pad.
Locations: Caledon
Cayuga
26 x 40′ (1040 sq. ft.)
This garage features a 16′ wide bay door, 4 large windows, and lots of height for a lift or hoist. The concrete floor is 5” thick and re-enforced.
Location: Cayuga
Stouffvile
40′ x 60′ (2400 sq. ft.)
This garage features 11′ wall height with 15′ clearance to the peak. Three large bay doors, lots of windows and maintenance free steel cladding complete the exterior.
Location: Stouffvile
Cambridge
30′ x 40′ (1200 sq. ft.)
This garage features 10′ interior wall height with maintenance free steel cladding, lots of natural light, and 10′ x 9′ bay door complete the exterior. The concrete floor is 5” think.
Locations: Cambridge